Cinema Camera Support Rental

Matthews DC Slider rental

Matthews DC Slider

Used for sliding camera systems in multiple angles. It also works as a mini-jib arm and can transform into a 6′ tower. Equipped with a counterbalance mechanism, the DC-Slider offers a stable shooting platform even when set in extreme angles. A total of 26 lb. counterweight allows you to perfectly stabilize a camera system weighing up to 22 lb on the arm.

Cinivate Atlas Sliders rental

Cinivate Atlas Sliders

  • Cinevate Altas 10 FLT 26″ Slider
  • Cinevate Atlas 10 LTS 35″ Slider
  • Cinevate Atlas 30 47″ Slider
  • Cinevate Atlas 200 Slider
Kessler Philip Bloom Series rental

Kessler Philip Bloom Series

  • Pocket Dolly Slider 3′
  • Kessler Cineslider 5′
  • Kessler Pocket Jib Pro
  • Elektra Drive Motor for Cineslider 5′
  • Elektra Drive Basic Controller
Matthews Doorway Dolly Round-D-Round rental

Matthews Doorway Dolly Round-D-Round

Designed with a wheel base of 28.25″ without an extended axle. Overall length reaches 51″ with a platform size of 27.5″ x 41.5″. The two side boards add 10″ each. Ground clearance is 9″ or 3″ when inverted. Load capacity is 800 lb.

Dana Dolly Uni Kit rental

Dana Dolly Uni Kit

Easy to set up, can be used with a variety of track options, and can be supported using standard junior stands, apple boxes, or the ground, whatever the shot requires.

Cineped Camera Slider

Cineped Camera Slider

Includes:

  • (1) Camera slider – 3.5ft rotational
  • (1) Cineped Quattro/ 4leg
  • (1) 100mm adapter for fluid head
  • (1) 150mm adapter for fluid head
  • (2) Carrying Cases

* Fluid head is not included.
* 1 year warranty
* Made in USA

Click here for specifications
Setup for Slider (Click for enlarged version)
Setup for Quattro (click for enlarged version)

Induro Hi-Hat tripod

Induro Hi-Hat

Induro’s DR Hi-Hat Tripod Set is an aluminum alloy tripod that can support up to 220 lb. The set includes a short tripod with a Mitchel mount. Each leg of the tripod has a two-section extension and three variable angle adjustments. Bubble levels are built-in on the tripod spider and on the half ball adapter’s top plate, so you can be level right from the start. Reinforced ovoid feet that pivot give you a secure grip on any terrain (the set can also be screwed, spiked or secured in some other way to the ground or a board). Three evenly spaced points give you secure 3/8″ and 1/4″ threaded points for mounting accessories.

OConner Ultimate 2575D Fluid Head- Mitchell

OConner Ultimate 2575D Fluid Head- Mitchell

This head is the flagship of OConnor’s Ultimate range of fluid heads and features OConnor’s stepless, ultra-smooth pan & tilt fluid drag specifically designed to give you the ultimate control and stability for film style shooting. Featuring OConnor’s patented sinusoidal counterbalance system for true, accurate balance at any point in the tilt range. Add to this OConnor’s stepless, ultra-smooth pan & tilt fluid drag, and you’ve got the best of all possible combinations.

OConner 2065 Fluid Head- Mitchell

OConner 2065 Fluid Head- Mitchell

The 2065 shares the ergonomic design of OConnor’s higher-payload fluid heads like the popular 2575D and 120EX models. Pan and tilt brakes are conveniently located on the left side of the head–so operation is both intuitive and familiar. The platform is equipped with dual scales, one on each side, and four handle rosettes to allow operation from either side of the head as well as front or back handle mounting. A handy one-touch platform release lever enables one finger or hand action to undo the safety catch and open the lever, which speeds deployment and location changes in the field.

Oconner Ultimate 1030DS

Oconner Ultimate 1030DS

The 1030Ds features stepless, ultra-smooth pan and tilt fluid drag specifically enhanced to provide ultimate control and stability for digital cinematography shooting. Sinusoidal Counterbalance system provides true, accurate balance at any point in the tilt range The new ergonomic crank-style counterbalance control simply pulls out of the rear of the head. Plus the Action Brakes for pan and tilt unlock through a single-handed squeeze. And the new sideload platform enables rapid attachment of the camera as well as an extended range of movement for balancing front heavy setups. The 1030Ds supports payloads up to 41 lbs. (18.6 kg) at 6” (15cm) COG with a +/- 60° tilt range.

OConner 30L Carbon Fiber Tripod

OConner 30L Carbon Fiber Tripod

At just 8.8 lbs (4 kg) the 30L’s double extension design ensures it can safely and stably carry payloads of up to 209 lbs (95 kg) even at its maximum height of 63.4" (161 cm). And the 30L is versatile. Despite its generous height range, it folds down to a mere 29.5” (75 cm) for convenient travel. A smart quick clamping system offers secure and visible tripod lockdown. The system’s integral spreader system offers easy trouble-free security. Removable rubber feet expose spikes for optimal traction and payload safety on a variety of surfaces.

Ronford Heavy Duty Tall Tripod-Mitchell W/ Spreader

Ronford Heavy Duty Tall Tripod-Mitchell W/ Spreader

The Ronford Baker Heavy Duty Tripod is an industry standard. Featuring a Mitchell top plate, LM25 anodized castings, stove enameled black texture. Tubes are 1” dia x 16swg HE30TF alloy, polished and anodized, with nylon wipers and nylon locking pads. Stainless Steel spikes to feet, with rubber covers. Locking levers are anodized and stove enameled black texture. All steel parts are hardened where necessary, and chrome plated. With legs spread at 1’6” (45.7cm): closed 3ft’ (91.4cm), fully extended 5’6” (167.6cm). Weight is 22lb (10kg).

Ronford Baker Heavy Duty  Mitchell Baby Legs w/ Spreader

Ronford Baker Heavy Duty Mitchell Baby Legs w/ Spreader

The Ronford Baker Heavy Duty Tripod is an industry standard. Featuring a Mitchell top plate, LM25 anodized castings, stove enameled black texture. Tubes are 1” dia x 16swg HE30TF alloy, polished and anodized, with nylon wipers and nylon locking pads. Stainless Steel spikes to feet, with rubber covers. Locking levers are anodized and stove enameled black texture. All steel parts are hardened where necessary, and chrome plated. Height range from 1’8” (50.8cm) to 3’ (91.4cm), weight is 18lb (8kg).

Tango II Swing Plate

Tango II Swing Plate

Technical Specifications:

  • Length: 22.2 cm / 8.76 inches (without handle)
  • Length: 31.9 cm / 12.56 inches (with handle)
  • Width: 15 cm / 5.9 inches
  • Height: 5.7 cm / 2.24 inches
  • Weight: 3.27 kg / 7.2 lbs (with handle)
  • Rotation center height: 145mm / 5.7 inches
  • Swing angle: 90 degree scale: +45 deg. to -45 deg. per degree
  • Camera fitting: Touch & Go 35mm camera plate with two screws 3/8"
  • Camera fitting: Safety lock, single handed operation
  • Tripod fitting: Three screws 3/8"
  • Max. load: Approx. 50 kg / 110 Lbs

  • Hi Hat w, Base

    Hi Hat w, Base

    Mitchell Hi-Hats feature a 3" hole and 3 key ways for Mitchell type fluid and gear heads. Each of the three legs have a 3/8" mounting hole to secure the hi-hat to mounting plates. The hi hat is mounted on a hi hat board that has cut corners (octagon shape) in order to fit into tighter spaces.

    Lo Hat w, Base

    Lo Hat w, Base

    Mitchell Low-Hat is 1 3/4" tall. Accepts all Fluid and Gear Heads that terminate with a standard Mitchell 3" thread. Each of the 3 legs have mounting holes to secure the Low-Hat to a mounting board or plate. This low-hat has 3- key ways to facilitate use. The hi hat comes mounted on a hi hat board that has cut corners (octagon shape) in order to fit into tighter spaces