Freefly Movi M5
3-Axis Motorized Gimbal Stabilizer
Designed for mid-sized DSLRs, mirrorless cameras, and camcorders weighing up to 5 pounds, including the lens. For camera stabilization the M5 uses three motors and an IMU (inertial measurement unit) to detect and counteract unwanted movement along three axes: pan, tilt, and roll. In particular, compensating for handshake or vehicle-induced vibration and reducing translation. There is a quick-release adapter available separately so that it can be mounted on cranes, jibs, vehicle mounts, and other camera support equipment. There is also an MR (multi-rotor) conversion kit, available separately, so that it can mounted on a UAV.
Ronin 3-Axis Brushless
A camera stabilization system designed to give the operator close to the freedom of unencumbered handheld shooting but without the hand-shake. Suitable for most camera types and configurations up to 16 pounds, Ronin uses brushless motors that work on three axes: one for side-to-side “roll” – keeping the horizon level – one for tilt, and one for pan. The system is computer-controlled and boasts a precision of control of [0.02[. An IMU (inertial measurement movement) detects movement and engages the motors to react, using algorithms to differentiate between intentional movement such as pans and tracking shots from unwanted shake. In addition to handheld shooting, the gimbal can be used in vehicle mounting scenarios and other contexts where vibrations or other abrupt movements would make tripods and rigid camera support systems unsuitable.
A 3-Axis Handheld Gimbal Stabilizer designed to give the operator close to the freedom of unencumbered handheld shooting but without the hand-shake.
- Supports Cameras up to 8 Pounds
- Precision of Control: ±0.02°
- Transmitter for Remote Pan/Tilt Control
- Tool-Less Balance Adjustment System
The PILOT with IDX battery system provides the user with a complete system. Through the addition of the users camera and a SteadiSTAND or similar balance stand the unit is ready to use. The IDX E-7S battery is based on the V-Lock mounting system and will provide power for the on board monitor and any optional accessories. Should the camera have a 12 volt input or a converter for 7.2 Volt operation the IDX battery has sufficient capacity to power both the camera, monitor and accessories.
A modular camera stabilizer designed specifically for HD broadcaast, feature film, and all demanding camera stabilization requirements. The highly adaptive and open architecture of the Steadicam M-1 allows for extreme system configuration and quickly accommodates industry standard cameras and accessories. Built around rigid, all-aluminum base and stage freames; rigid, high modulus, and indexed carbon fiber telescopic posts; and an ultra-high-precision gimbal.
ALBA READYRIG GS
Newly designed waist support system evenly distributes the weight across your hips.
- Y axis stabilization, supports up to 30lb
- Extended range of motion
- Quick release connector for gimbals
- Carbon Fiber Rods
- Pass through a doorway or sit in a car with ease